Restore Camera back to factory settings

Camera Hardware and Software Installation

Moderator: support

Restore Camera back to factory settings

Postby support » Sun Feb 28, 2016 2:23 pm

Hi there,
If you ever forget your admin passoword or have any other reason to reset the camera to its factory settings, please use the following procedure:

>Make sure the camera is powered up.

>It is easier to use the software reset functions. Log in the web server of camera and browsers to Settings> Others > Reset
camera reset.jpg

>If hardware reset is needed, insert the tip of a paper clip in the Reset pin hole to press the reset switch. You will feel the click when the switch engages.


A few seconds later the camera will restart and is now at factory settings. After reset the username and password will both be "admin" again.

Best regards,
Working Time: 1:00am-10:00am GMT Monday-Friday (6:00pm-3:00am PST Sunday-Thursday)
Skype: tenviscs
User avatar
Posts: 3201
Joined: Fri Jul 05, 2013 9:48 am

Return to Camera Installation